Control panel
A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit
or flashing light.
On : The power is on.
Flashing : The printer is receiving data or
performing head cleaning or other
operations during shut-down.
Off : The power is off.
C M button (media setup button)
Pressing this button displays the Media Setup
menu on the screen to perform Feed To Cut
Position, Media Remaining, Select Media,
Customize Settings, and Easy Media Setup.
U “The Media Setup Menu” on page 93
If you press this while printing, you can adjust the
media feed.
U “Correcting Banding” on page 51
D Display
Displays the printer's status, menus, error
messages, and so on. U “Understanding the
Display” on page 13
E Menu button
Press this button to display menus. U “Using the
Control Panel Menu” on page 87
F y button (back button)
Press this button to exit to the previous menu
when options are displayed. U “Menu
Operations” on page 87
G
l/r buttons (left and right arrow buttons)
Use to position the cursor when performing such
tasks as entering a Setting Name or IP address in
the setup menu.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Introduction
12
To Next Page
Loading...
Need help?
General