Epson SC-S60600 Series User Manual

Measure using a scale of up to 0.5 mm.
J
The screen for entering check results for the
adjustment pattern is displayed.
When anything except Textile is selected
Press the d/u buttons and set the value printed
under the pattern selected in group A from step
9, and then press the Z button.
Set B in the same way.
When printing restarts for the adjustment
pattern and printing is complete, the
adjustment value entry screen is displayed.
When Textile is selected
Set the value measured in step 9, and then press
the Z button.
When printing restarts for the adjustment
pattern and printing is complete, the
adjustment value entry screen is displayed.
K
Check the printed adjustment pattern.
Model/Status Adjustment Pattern
❏ SC-S40600 Series
❏ In one head mode for
SC-S80600 Series/
SC-S60600 Series
Two blocks for A
and B
*1
In two head mode for
SC-S80600 Series/
SC-S60600 Series
Six blocks for A to
F
*2
*1 In one head mode for 10 color mode in SC-S80600
Series when MS installed, four blocks for A to D.
*2 In two head mode for 10 color mode in SC-S80600
Series when MS installed, 12 blocks for A to L.
Select the finest lined pattern (all lines overlap)
for both. Select "-1" in the cases shown below.
L
The screen for entering values is displayed.
Using the u/d buttons, change the value to the
value recorded in Step 11, and then press the
Z button.
M
When multiple check patterns have been
printed, select the number per check pattern,
and then press the Z button.
Using the u/d buttons, change the value to the
value recorded in Step 11, and then press the
Z button.
When you enter the final setting, the status display
screen is displayed.
Performing Customize Settings after registration
After registration, when performing Media Type or
Advanced Settings in Customize Settings, you need
to perform Media Adjust again.
U “Media Adjust” on page 47
Media Adjust
This menu is used if the following conditions occur
after performing media adjustment.
Even after Auto Media Adjust is performed,
banding or graininess is found in the print results
Select Manual, and then perform Media Adjust -
Standard and Head Alignment.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
47

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English