Epson SC-S60600 Series User Manual

: The heater has reached the selected
temperature.
: The heater has not reached the selected
temperature.
C Feed adjustment information during printing
This information is displayed when the adjustment
value is specified during printing.
U “Correcting Banding” on page 51
D Media info
❏ From left to right, this display shows the number for
the selected media, platen gap, media width, and
media remaining.
❏ The selected platen gap is shown as follows.
:1.6
:2.0
:2.5
❏ The media remaining is not displayed if OFF is
selected for Length in the Media Remaining menu.
U “Media Remaining” on page 93
E Ink cartridge status
Displays the approximate level of remaining ink
and the current status. When ink runs low or an
error occurs, the display changes as shown below.
Normal Warning or error
1 Status indicators
The ink cartridge status is indicated as follows.
: Ready to print. The height of the
indicator changes with the level of ink
remaining.
: Ink is low. You need to prepare a new
ink cartridge.
: The level of ink remaining has
reached the limit. Replace the old ink
cartridge with a new one.
: The ink cartridge is not latched.
Lower the lock lever to engage the latch.
: No ink cartridge is inserted. Insert the
ink cartridge and lower the lock lever
to engage the latch.
: An error occurred. Check the message
on the screen, and clear the error.
: A Cleaning Cartridge is installed. The
height of the indicator changes with
the level of cleaning fluid remaining.
2 Ink color codes
SC-S80600 Series
OR : Orange
LK : Light Black
BK : Black
C : Cyan
M:Magenta
Y:Yellow
R:Red
LC : Light Cyan
LM : Light Magenta
WH : White
MS : Metallic Silver
CL : Cleaning cartridge
SC-S60600 Series/SC-S40600 Series
BK : Black
Y:Yellow
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Introduction
14

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English