Feasa ICT Series User Manual

FEASA LED ANALYSER
ICT VERSION
User Calibration Mode
ResetUserCal - Reset the usercal setting to factory default
Transmit Receive
resetusercal OK
Description
This command will reset the calibration set back to factory default values. The Led analyser is
capable of storing ten (00-09) separate user Calibration sets on the board. Each one must be
reset seperately.
The command resetusercal resets the selected Calibration set to factory default
Example:
If you want to reset calibration set No.08
setcalibration08
OK
resetusercal
OK
Example:
If you want to reset calibration set No.00
setcalibration00
OK
resetusercal
OK
The command GETCALIBRATIONSET will return the number of which stored Calibration set of
values are currently selected.
Example:
calibrationset03
Back to Index
105

Feasa ICT Series Specifications

General

Brand	Feasa
Model	ICT Series
Category	Measuring Instruments
Language	English