Feasa ICT Series User Manual

FEASA LED ANALYSER
ICT VERSION
Command Summary:
COMMAND DESCRIPTION
Capture
Store LED Data - Auto Range
Capture#
Store LED Data - Manual Range
CapturePWM
Store PWM LED Data – Auto Range
Capture#PWM@@
Store PWM LED – Manual Range
Capturemulti
Store LED Data – Specific Range, Specific Fiber
CaptureSequence
Store LED Data – Sequence Mode
getRGBI##
Get RGB, Saturation and Intensity for a LED
getHSI##
Get Hue, Saturation and Intensity for a LED
getxy##
Get the xy Chromaticity values
getCCT##
Get colour Temperature for LED
getWI##
Get Wavelength & Intensity for LED
getUV##
Get the u'v' Chromaticity values
getWAVELENGTH##
Get Dominant Wavelength for LED
getINTENSITY##
Get the Intensity for a LED
getFACTOR
Get the Exposure Factor
get7SEG#
Get the value of a 7segment display
getSTATUS
Get the summary details of a Led Analyser
getICTSTATUS
Get the mode status of the Analyser
getHW
Get the Hardware Version of the Analyser
getSERIAL
Get the Serial Number of the Analyser
getVERSION
Get the Firmware Revision of the Analyser
getcalibrationdate
Get the Calibration Date set by the user
getBAUD
Get the Baud Rate the Analyser is set to
getINTGAIN##
Get the Intensity Gain Factor
getXOFFSET##
Get the x Chromacicity Offset
getYOFFSET##
Get the y Chomacicity Offset
getWAVELENGTHOFFSET@@ Get the wavelength offset for fiber
142

Feasa ICT Series Specifications

General

Brand	Feasa
Model	ICT Series
Category	Measuring Instruments
Language	English