Feasa ICT Series User Manual

FEASA LED ANALYSER
ICT VERSION
Capture Sequence Mode
GetSequenceStartDelay - Get the delay before the CS command
Transmit Receive
getsequencestartdelay xxx
Where:
xxx represents the delay in milliseconds
To determine the delay in milliseconds before the sequence capture is initiated use the
command getsequencestartdelay It will return a time in the range 000 - 999ms
getsequencestartdelay
123 ms (Delay before Sequence Capture is 123ms)
Back to Index
136

Feasa ICT Series Specifications

General

Brand	Feasa
Model	ICT Series
Category	Measuring Instruments
Language	English