Appendix A — Camera Conditions (Select models only)
10
To configure day / night settings:
1. Click Day / Night to enter the day / night submenu..
2. Under Type, select how the camera switches between day and night modes:
• Electron: Day / night switch-over is determined by camera software. This is recom-
mended if the camera switches its viewing mode at around the same time every day
(for example, sunset or sunrise in an outdoor location).
• Mechanism: Day / night switch-over is determined by a light filter. This is recom-
mended if the camera is in a location with fluctuating light conditions (for example,
indoors with lights turning on and off throughout the day).
3. Under Day & Night, select one of the following options:
• Auto: The camera switches between day and night mode automatically with chang-
ing light conditions (recommended).
• Color: The camera remains in full color. This setting is not recommended unless
the camera is in an area with constant lighting.
• B&W: The camera remains in black & white. This setting is not recommended un-
less the camera is in a constantly dark environment.
4. Under Sensitivity, click + / - or use the slider to set the sensitivity for day / night
switch-over. Setting a lower value means that the camera’s day / night switch-over will
happen in brighter conditions, while a higher value means the switch-over will happen
in darker conditions.
Note
Day & Night must be set to Auto to configure this menu item.
10.6 Focus Setting
Configure how the camera focuses on objects in the image.
#LX400038; r. 1.0/18537/18537; en-US
131
To Next Page
Loading...
Need help?
General
