Setup
5
To configure No SD Card errors:
1. Check Enable to enable No SD Card errors.
2. Check Relay-out to trigger an alarm out device when No SD Card errors occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
Note
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
3. Check Send Email to send an email alert when No SD Card errors occur.
5.4.5 Capacity Warning
A Capacity Warning occurs when the recording destination (microSD / SD card or FTP
server) reaches capacity.
To configure Capacity Warnings:
1. Check Enable to enable Capacity Warnings.
2. Under Capacity Limit, set the percentage of free space on the recording destination
that will trigger a Capacity Warning. For example, if you enter 10% and your microSD
card is 1GB, a warning will occur when there is only 100MB of free space remaining.
3. Check Relay-out to trigger an alarm out device when Capacity Warnings occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
Note
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
4. Check Send Email to send an email alert when Capacity Warnings occur.
5. Click Save to save changes.
5.4.6 SD Card Error
An SD Card Error occurs if an error occurs recording to the SD / microSD card (for exam-
ple, if the card is damaged or is using the wrong file system).
#LX400038; r. 1.0/18537/18537; en-US
39
To Next Page
Loading...
Need help?
General
