Using FLIR Cloud™ Client for PC or Mac
8
3. Select the number of the preset you would like to add.
4. Move the camera to the desired position.
5. Click
to save the current position as a preset.
To go to a saved preset:
1. Select the preset number from the list or click
to go to the currently selected
preset.
8.3.2 PTZ Tours
Tours will cycle through a set of presets.
To configure a PTZ tour:
1. Click
to open the Advanced controls. Select Tour.
2. Click
.
3. Under Cruise ID, select the number of the tour you would like to configure.
4. (Optional) Under Cruise Name, enter a name for the tour.
#LX400038; r. 1.0/18537/18537; en-US
68
To Next Page
Loading...
Need help?
General
