Fuji Xerox ApeosPort-V C3320 Administrator's Guide

Common Service Settings
137
Tools
5
When you load non-standard size paper in a tray, select [Custom Size], and specify the width
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
detect a tray, use Tray 5.
z
Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight" (P.38).
z
Paper Size
When the One Tray Module (optional) is installed, you can load both standard size paper
and non-standard size paper for Trays 1 and 2. When you load non-standard size paper,
select [Custom Size], and then set the size in the X (width) direction and in the Y (length)
direction. Set the size in X (width) direction between 148 and 215 mm and the Y (length)
direction between 210 and 355 mm in 1 mm increments.
Select [Auto Detect] to use the standard size paper.
For more information, refer to "Supported Paper" (P.40).
z
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
z
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether or not the setting items specified in [Paper Size] or [Auto Paper Select] under
[Paper Tray Attributes] are to be displayed on the [Paper Supply] screen.
 Disabled
Does not display the items specified in [Paper Size].
 Size Detection
Displays the setting in [Paper Size].
 Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Tray 1 and Tray 2 (optional). You cannot apply this setting to Tray 5.

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English