5 Tools
138
Tools
5
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for
automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Tray 1 and Tray 2 (optional). You cannot set this setting to Tray 5.
Note • When a logical printer is used and if you specify the paper tray with the print driver, this setting will
be ignored.
Paper Type Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays for automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
You can set Bond paper, Plain paper, Recycled paper, and Custom Paper 1 to 5.
The paper type setting is prioritized over the paper tray priority settings.
If, however, different paper types appear in the same priority sequence, the paper is
determined by paper tray priority sequence. The tray containing paper type set to [Auto
Paper Off] is not selected by automatic tray selection.
For more information about the tray priority sequence, refer to "Paper Tray Priority" (P.138).
Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Tray Attributes] when
copying with Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray
5] screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
îš„ A/B Series Size
You can select a paper size from A and B series sizes.
îš„ Inch Size
You can select a paper size from inch series sizes.
îš„ Others
You can select a paper size from other sizes.
îš„ Custom Size
You can enter any size. Set the X width between 77 and 215 mm, and the Y length between
127 and 355 mm in 1 mm increments.
Note • For envelopes, enter the size with the flap size excluded.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
îš„ Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], and [Enable for Same
Paper Type/Color].
To Next Page
Loading...
Need help?
General
