3 Maintenance
78
Maintenance
3
Adjusting Color Registration
Allows you to calibrate the color registration automatically or manually.
Note • The color registration is automatically adjusted and usually without any user action. However, if the
misregistration becomes large during the next automatic adjustment from the last adjustment, you
can adjust the color registration using this feature.
Auto Color Registration
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Maintenance].
  
23
56
89
0
＃
C
Power
Saver
Power Data Error
Clear All
Interrupt Stop
Start
Log In / Out
Job
Status
ABC
Dial
Pause
Speed
Dial
TUV WXYZ
JKL MNO
DEF
Machine
Status
To Next Page
Loading...
Need help?
General
