15 Appendix
586
Appendix
15
z
Exiting the Power Saver mode activates the entire machine when [Paper Tray Attributes
During Loading] is set to [On].
z
The entire machine exits the Power Saver mode when you press the <Machine Status>
button, enter the System Administration mode, or select the Stored Programming service.
z
The machine does not exit the Sleep mode when you use the EP service by EP-BB.
z
When [Tools] > [System Settings] > [Connectivity & Network Setup] > [Port Settings] >
[USB] > [USB - Print Mode] is set to any option other than [Auto], exiting the Power Saver
mode activates the entire machine.
z
The output device is activated when Secure Print is executed using job tickets of
ContentsBridge Utility.
îš„ About View Image Generation
It may take time for generating view images depending on the type of document. If you
want to speed up the printing process or there is no need for displaying view images, you
can disable the image generation setting of the print driver.
Note • The print driver settings have priority over the machine settings.
Notes and Restrictions on the Use of the Copy Feature
îš„ Copy Feature
The machine does not offer the Improves Fit feature.
îš„ Meter Count for Dual Color and Single Color Copies
Dual color and single color copies are counted as color copies.
îš„ Color Effect for Dual Color Copy
To extract colors for dual color copy, adjusting the colors of the document is required in
advance.
Our service representative performs the adjustment. Contact our Customer Support Center.
îš„ Auto Contrast
The machine does not offer the [Auto Contrast] feature for [Color Effects].
îš„ Pages per Side for Black & White and Color Mixed Documents and Meter Count
If you copy a document that contains black & white and color pages by specifying [Pages
per Side], an output sheet that has both black & white and color pages will be counted as a
color page.
îš„ Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to the
Services Home screen, and then select a service. In that case, the settings specified in either
service are cleared.
îš„ ID Card Copy
z
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID card
in a different orientation from the original orientation depending on the magnification
ratio specified.
To Next Page
Loading...
Need help?
General
