viii
Warning Indications Used In This Manual
This manual uses the following indications to ensure safe and correct use of this product, and to
prevent possible danger and injury to the Operator and other persons.
Symbols Used In This Manual
This manual uses the following symbols in explanations in addition to warning indications.
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury or death.
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
This symbol alerts operators to particularly important information. Be sure
to read this information.
This symbol alerts operators to helpful advice regarding operation.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not
perform.
The drawing inside or under the circle shows the specific action that is not
allowed.
To Next Page
Loading...
Need help?
General