Fujitsu fi-5900C User Manual

186
8.3 Offset/Scan scale
8.3 Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 177.
2. Select [Device Setting] from left side list in the window, and press
[Offset].
ATTENTION
The factory default setting are appropriate, so normally there is no need to
make any adjustment.

Fujitsu fi-5900C Specifications

General

Brand	Fujitsu
Model	fi-5900C
Category	Scanner
Language	English