204
8.14 Life counter setting
8.14 Life counter setting
This counter specifies the page count to ask operator to replace the consumable. When the page count
exceeds the value specified here, the background color of the counter in the window on
page 126 becomes
yellow, or replacement message window on
page 128 appears.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 177.
2. Select [Device Setting 2] from left side list in the window, and select
[Useful life counter] from its lower level.
3. Specify the counter value to change its color for each consumable (Pick
roller, Brake roller, Separartion pad, separator roller).
Setting is available from 10,000 to 2,550,000 with 10,000 increment.
To Next Page
Loading...
Need help?
General