Fujitsu fi-5900C User Manual

193
8.5 Multifeed detection at manual feed mode
8
SCANNER SETTINGS
8.5 Multifeed detection at manual feed
mode
Set whether to detect multifeed during manual feed mode or not.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 177.
2. Select [Device Setting 2] from left side list in the window, and select
[Multifeed detection when scanning in manual feeding mode] from its
lower level.
3. Select one of the following option.
Disable: Does not detect multifeed at manual feed mode.
Follow driver settings: Multifeed detection is valid only when device driver allows mul-
tifeed detection.

Fujitsu fi-5900C Specifications

General

Brand	Fujitsu
Model	fi-5900C
Category	Scanner
Language	English