EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY RX1330 M5

Fujitsu PRIMERGY RX1330 M5 User Manual

Fujitsu PRIMERGY RX1330 M5
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #292 background imageLoading...
Page #292 background image
iRMC microSD card
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC.
M.2 SSD
The system board of
fers two M.2 slots (Key M) with support 80 mm and
1
10 mm long M.2 SSDs. With the M.2 SSD an internal SSD is offered. This
SSD can be configured as a boot device or data storage device.
Dual microSD 64GB Enterprise
The system board is optionally equipped with a Dual microSD 64GB
Enterprise. The Dual microSD 64GB Enterprise offers an Integrated
Hardware RAID solution based on RAID-on-Chip (ROC) technology.
15.3 CMOS battery
15.3.1 Replacing the CMOS battery
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
For this server the battery type CR2450 is used.
CAUTION
The CMOS battery must be replaced with an identical battery or
with a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For more safety information, see "Environmental protection" in the
operating manual of your server.
System board and components
292 Upgrade and Maintenance Manual RX1330 M5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M5 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M5 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY RX1330 M5
CategoryServer
LanguageEnglish

Related product manuals