Fujitsu PRIMERGY RX1330 M5 User Manual

Concluding steps
▶
Install the riser module 2, see "Installing a riser module" on page 64
.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 57.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
"Resuming BitLocker functionality" on page 86.
▶
Enable the TPM in the system board BIOS, see "Enabling the TPM in the
system board BIOS" on page 298.
Enabling the TPM in the system board BIOS
Proceed as follows:
▶
Switch on or restart your server.
▶
As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶
Select the Advanced menu.
▶
Select the Trusted Computing submenu.
▶
Set the TPM Support and TPM State settings to Enabled.
▶
Under Pending TPM operation, select the desired TPM operation mode.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
15.4.4 Removing the TPM
Field Replaceable Unit
(FRU)
Hardware: 30 minutes
System board and components
298 Upgrade and Maintenance Manual RX1330 M5

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX1330 M5
Category	Server
Language	English