6 Power supply unit (PSU)
6.1 Safety notes
CAUTION
â–¶
Do not disassemble the PSU. Doing so may cause electric shock.
â–¶
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server
, wait for hot components to cool
down before removing the PSU.
â–¶
When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
â–¶
The PSU is heavy
, so handle it carefully. If you drop it by mistake,
injuries may result.
â–¶
For more information, see "Important information" on page 29.
6.2 Basic information
The server can be either equipped with:
–
a standard PSU
–
up to two hot-plug PSUs
Server equipped with a standard PSU
The PSU adjusts automatically to any mains voltage in the range of 100
V -
240 V
.
CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V
.
â–¶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
RX1330 M5 Upgrade and Maintenance Manual 95
To Next Page
Loading...
Need help?
General