GE Baker Hughes PanaFlow LC XMT1000 User Manual

Appendix H. Foundation Fieldbus Communication
142 PanaFlow™ LC User’s Manual
H.2.5 DD File
The DD file can be found on the Foundation Fieldbus website www.fieldbus.org under BHGE as manufacturer
and
XMT1000 as model. It may also be found on the DCS vendor website if available.
H.2.6 Default Node Address
The default node address for each XMT1000 flow meter from the factory is 17 (see Figure 129 below). This
should be changed during commissioning.
Figure 129: XMT1000 Device Properties
Node Address

GE Baker Hughes PanaFlow LC XMT1000 Specifications

General

Brand	GE
Model	Baker Hughes PanaFlow LC XMT1000
Category	Measuring Instruments
Language	English