GE PM880 User Manual

August 2003
6-2 Programming Meter Settings
Entering the Meter Menu
To enter the Meter Menu, press the [MENU] key at the lower right
of the PM880 keypad. The Main Menu replaces the Status Bar at
the top of the screen. Press the [
X] arrow key twice to scroll from
the Site Menu to the Meter Menu. At the Meter Menu, press
[ENTER]. The screen appears similar to Figure 6-1 below. While
programming, refer to Figure B-4 on page B-4 of Appendix B,
Menu Maps.
Figure 6-1: The Meter Menu
To scroll to a particular option, press the [
T] or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
When entering parameters in an option, press:
• The [T ] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any
time and return to Operate Mode without changing the
parameters.
Dew Point, °C Temperature, °C
-52.0
23.0
Pressure, PSIg
55.00
10.0
Run Time, Hours
K K
K
10 Minutes
-30
70
0
612
Site Program Meter Logging Service
Units
Date/Time
Locale
Contrast
Backlight
Units
Language
Communication
Battery
User Tables
Snapshot
About

GE PM880 Specifications

General

Brand	GE
Model	PM880
Category	Measuring Instruments
Language	English