August 2003
5-14 Displaying and Configuring Data
Managing Files — The Drive Manager
On occasion, you might want to review, print, transfer or
rearrange some or all of the files in the PM880. The Drive
Manager allows you to view all the files stored in the meter.
While following the programming instructions, refer to Figure
B-2 on page B-2 of Appendix B, Menu Maps. To open the Drive
Manager:
1. Press
[MENU].
2. From the Site Menu (shown in Figure 5-6 on page 5-9), use
the [
T] or [S] arrow keys to move to the Drive Manager
entry on the menu. Press
[ENTER]. The screen now appears
similar to Figure 5-11 below.
Figure 5-11: The Drive Manager Window
The window on the left lists all the meter, site and log files in the
PM880, while the window on the right displays information on
the file highlighted in the left window.
SYSLOG.
DEFAULT.
GLOBAL.
TABLE.MET
FUNCTIO
AAA.LOG
BBB.LOG
CCC.LOG
Q.LOG
File Manager
Cancel OK
File
Info: SYSLOG.MET
03/15/01 10:39:20
6402 bytes
91136 bytes free
Sort
To Next Page
Loading...
Need help?
General
