August 2003
9-2 Diagnosis and Troubleshooting
Error Code Messages
Error Code messages appear on the screen while you are
displaying measurements. When logs appear in graph form,
errors are indicated by a vertical gray bar at the point of error.
When they appear in a spreadsheet format, errors are indicated by
their number, in place of the measurement. The Error Code
messages are only general descriptions of the possible problems.
Use Table 9-1 on page 9-3 to isolate and remedy the problem. If
you are unable to remedy the problem, contact GE Panametrics.
To Next Page
Loading...
Need help?
General
