GE Venue Go Service Manual

D
IRECTION 5813707-100, REVISION 2 VENUE™ SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-33
PRELIMINARY
8-2-12 Speakers Replacement Procedure
8-2-12-1 Tools
Phillips screwdriver of appropriate size
8-2-12-2 Time Required
5 min
8-2-12-3 Preparations
1.) Shut down the Venue Go™ ultrasound unit, as described in Power Shutdown.
2.) Prepare stable flat surface covered with a soft material (such as foam or thick cloth) to prevent
scratches to the display.
3.) Dismount Venue Go™ system from cart as described in Mounting / Dismounting System on Cart
and place it on a previously prepared surface with the display facing down.
8-2-12-4 Speakers Removal Procedure
1) Remove back cover.
2) Remove the fan.
3.) Release the speakers cables from the cable clips.
FRU Part #
Refer to Table 9-16 on page 9-17.
• Back Cover Removal Procedure
• Fan Removal Procedure
Figure 8-109 Speakers Cable

GE Venue Go Specifications

General

Brand	GE
Model	Venue Go
Category	Medical Equipment
Language	English