gefran ADV200 WA DC Series User Manual

2 ADV200 WA • Quick start up guide - Specification and installation
Information about this manual
The ADV200 WA Quick start guide is a handy-sized manual for mechanical installation, electri-
cal connection and fast start-up.
The manual explaining the functions and a description of the parameters and the manuals of
the expansions and eld bus can be found on the CD provided with the drive.
Software version
This manual is updated according the software version V 2.X.0.
Variation of the number replacing “X” have no inuence on the functionality of the device.
The identication number of the software version is indicated on the identication plate of the
drive or can be checked with the Firmware ver.rel - PAR 490 parameter, menu 2.5.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the
term “Drive” will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a
safe place and available to engineering and installation personnel during the product function-
ing period.
Gefran S.p.A has the right to modify products, data and dimensions without notice. The data
can only be used for the product description and they can not be understood as legally stated
properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improvingthis manual.
The e-mail address is the following: techdoc@gefran.com.
All rights reserved

gefran ADV200 WA DC Series Specifications

General

Brand	gefran
Model	ADV200 WA DC Series
Category	DC Drives
Language	English