HEIDENHAIN TNC 430 User Manual

HEIDENHAIN TNC 426, TNC 430 205
8.1 Working with Cycles
Working with the secondary axes U/V/W
The TNC performs infeed movements in the axis that was defined in
the TOOL CALL block as the spindle axis. It performs movements in
the working plane only in the principle axes X, Y or Z. Exceptions:
n You program secondary axes for the side lengths in cycles 3 SLOT
MILLING and 4 POCKET MILLING.
n You program secondary axes in the contour geometry subprogram
of an SL cycle.

HEIDENHAIN TNC 430 Specifications

General

Brand	HEIDENHAIN
Model	TNC 430
Category	Control Systems
Language	English