HEIDENHAIN TNC 430 User Manual

HEIDENHAIN TNC 426, TNC 430 71
4.6 Interactive Programming Graphics
Block number display ON/OFF
U Shift the soft-key row (see figure at upper right).
U To show block numbers: Set the SHOW OMIT BLOCK
NR. soft key to SHOW.
U To show block numbers: Set the SHOW OMIT BLOCK
NR. soft key to OMIT.
To erase the graphic:
U Shift the soft-key row (see figure at upper right).
U Delete graphic: Press CLEAR GRAPHIC soft key.
Magnifying or reducing a detail
You can select the graphics display by selecting a detail with the frame
overlay. You can now magnify or reduce the selected detail.
U Select the soft-key row for detail magnification/reduction (second
row, see figure at center right).
The following functions are available:
U Confirm the selected area with the WINDOW DETAIL
soft key.
With the WINDOW BLK FORM soft key, you can restore the original
section.
Function Soft key
Show and move the frame overlay. Press and
hold the desired soft key to move the frame
overlay.
Reduce the frame overlay — press and hold the
soft key to reduce the detail
Enlarge the frame overlay — press and hold the
soft key to magnify the detail

HEIDENHAIN TNC 430 Specifications

General

Brand	HEIDENHAIN
Model	TNC 430
Category	Control Systems
Language	English