PX4i and PX6i High Performance Printer User Guide 89
IPL Error Messages
Press any key to
continue
If an error occurs in the Fingerprint immediate mode, for example
“out of paper” when the print key is pressed, this event is set.
Off
Application load
error
If an application is started but does not run, the Ready-to-Work
indicator blinks. For example, if there is a syntax error in the
loaded program file.
Blinking
RtW blink by
application
This condition is set by the Fingerprint SYSHEALTH command.
For more information, see the Fingerprint Command Reference
Manual.
Blinking
RtW off by
application
This condition is set by the Fingerprint SYSHEALTH command.
For more information, see the Fingerprint Command Reference
Manual.
Off
Application
break
If you perform a user break by pressing - to stop an
application from running, or if a runtime error occurs, the Ready-
to-Work indicator turns off. You can turn the indicator on by
changing to Direct Protocol or running an application.
But, if the application handles the break (ON BREAK) or runtime
error (ON ERROR GOTO), the Ready-to-Work indicator is not
affected, and the application sets the status. For more
information, see the Fingerprint Command Reference Manual.
Off
Printhead not
found
Printhead not found. Off
Rebooted The printer has been rebooted. Off
Initializing The printer is initializing. Off
Printer crash Printer crash. In most instances, when the printer crashes, the
screen is reset which causes the Ready-to-Work indicator to turn
off.
Off
Printer turned
off
The printer is off. Off
Maintenance Maintenance Off
Power supply
Over
temperature
The power supply is overheated and needs to cool down. Off 1718
Printhead too
hot
The printhead is overheated and needs to cool down. You need to
resend your print job.
Off 1088
Message Description Ready-to-Work
Indicator
Status
Error
Number
Paper Out The printer is out of paper. Load a new roll of media. For help, see
"Loading Media" on page 5.
Blinking 1005
Ribbon Out The printer is out of transfer ribbon. Load a new roll of ribbon. For
helps, see "Loading Ribbon" on page 38.
Blinking 1031
Message Description Ready-to-Work
Indicator
Status
Error
Number
To Next Page
Loading...
Need help?
General
