PX4i and PX6i High Performance Printer User Guide 75
To configure the network type
1. Click Network Admin > Network Type.
2. Select either Ethernet or Wireless 802.11.
3. Click Submit new settings.
4. Reboot the printer for the changes to take effect.
Note: Once you change the network type to Wireless 802.11, you cannot communicate with
the printer using Ethernet. You need to change the command through the Setup
menu or send a command through a serial connection.
Configuring Avalanche Settings
Use the Avalanche page to view and change Wavelink Avalanche settings.
To Next Page
Loading...
Need help?
General
