PX4i and PX6i High Performance Printer User Guide 71
Configuring Mail Settings
Use the mail settings page to view and change e-mail (SMTP) server settings.
To configure mail settings
1. Click Network Admin > Mail.
2. Select the mail server settings and enter mail addresses.
3. Click:
• Submit Mail Settings to send the changes to the printer.
• Submit & Send test mail to send the changes to the printer and test your new
settings.
Old Admin Password You need to enter the old password before you can change the
password.
New Admin Password The new password you want to use.
Restrictions Sets restrictions on who is allowed to upgrade the printer firmware or
view and change network settings. You cannot remove “admin” from the
list of authorized users.
Users allowed to update: Defines who may perform a firmware upgrade
using FTP, PrintSet, or IFAB. This setting does not affect upgrading from
a Compact Flash card.
Users allowed to read/write protected LAN1 settings: (Fingerprint
only) Defines who may read/write settings in the LAN1 section.
Users allowed to change network settings: (Fingerprint only) Defines
who may change the network node in the setup. This setting is not
supported if you are setting up the printer from its internal keyboard.
Users allowed to change wireless settings: Defines who may change
WLAN or 802.1x settings.
Setting Description
To Next Page
Loading...
Need help?
General
