PX4i and PX6i High Performance Printer User Guide 67
To configure media settings
1. Click Printer > Rfid.
2. Enter the correct information for the RFID media you are using.
3. Click Submit Setup.
Configuring Print Engine Settings
Use the print engine page to adjust the media feed direction (start and stop adjust
positions) and print speed. The value of the head resistance is read-only and is
measured by the firmware when the printer starts up.
To configure print engine settings
1. Click Printer > Print Engine.
2. Enter the correct information for the print engine.
3. Click Submit Setup.
To Next Page
Loading...
Need help?
General
