Honeywell PX940 User Manual

92 PX940 User Guide
System Network Services
Note: You will only see Manage Services from the menus if you have an Ethernet or
Wireless module installed in the printer.
Note: The printer supports 10/100 Mbps Ethernet (10BASE-T, 100BASE-T)
To view these services:
• From the printer Main Menu, select Settings > System Settings > Manage
Services.
• From the printer web page, go to Configure > System Settings > Manage
Services.
System
Network
Service Setting
Description Default
Web Server Determines if the web server is enabled in the printer. Enable
FTP Determines if the printer can use File Transfer Protocol. Disable
SFTP Determines if the printer can use Secure File Transfer Protocol Enable
Avalanche Determines if the printer can be managed by Wavelink Avalanche. Enable
Net1 Determines if the printer can use Telnet to communicate with
Fingerprint.
Enable
SNMP Determines if the printer can use SNMP. Enable
LPR Determines if the printer can use the line printer server (LPR)
daemon.
Enable
IKEv2 Determines if the printer can use IKEv2. Disable
SSH Determines if the printer can use Secure Socket Handling (SSH). Disable
Telnet Determines if the printer can use Telnet. Disable
XML Determines if the printer can use XML printing. Enable
Time Server Determines if the printer uses the Network Time Protocol (NTP) to
synchronize its time with a network time server. The default Server
Address is ntp0.cornell.edu, and the default Port Number is 123.
Disable
Device
Management
Determines if the printer can use 9300 TCP/IP port to
communicate with HCD.
Disable
Connectivity
Agent
Determines if the printer can communicate with Honeywell Cloud
on port 10000.
Disable

Honeywell PX940 Specifications

General

Ethernet LAN	Yes
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Flash memory	256 MB
Internal memory	1024 MB
Page description languages	DP, DPL, XML, ZPL II, IPL
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Cables included	AC
Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI
Minimum print length	4800 mm
Maximum printing width	108 mm
Ribbon width	110 mm
Core diameter	25 mm
Ribbon length	450 m
Maximum roll diameter	80 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Display	LCD
Product color	Black
Display diagonal	3.5 \
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	506 mm
Width	261 mm
Height	398.7 mm
Weight	23000 g