58 PX940 User Guide
Summary Report
Summary report is generated based on the individual report's label ID range
exported by the user. For example, user exported individual report starting from
label ID, 1000 to 2000, then the summary report will be generated based on data in
the individual report for label ID from 1000 to 2000.
Restore Default Verification Files
You can restore the default verification database and remove all failed label image
files in order to free up the memory through the following interfaces:
• PrintSet 5
•Web page
•LCD
To restore the default verification database:
1. Go to Webpage > Services > Restore Defaults > Verification Files
2. Click Restore.
Content Description
Summary ID Summary report ID
Example:
<Summary ID="1000_2000>
Total
Number
Total number of individual reports created based on the input range. This
number includes the retry report.
Example:
<TotalNumber>1000</TotalNumber>
Failed
Number
Number of failed individual reports
Example:
<FailedNumber>2</FailedNumber>
Failed Rate Failure rate in percentage
Example:
<FailedRate>0.2%</FailedRate>
Failed Label
Details
Failed label details
Example:
<FailLabel Retry="0" PrintJob="13" LabelID="14">
Summary ID Summary report ID
Example:
<Summary ID="1000_2000>
To Next Page
Loading...
Need help?
General
Weight and Dimensions
