Honeywell PX940 User Manual

APPENDIX
C
PX940 User Guide 97
ACCESSORIES AND OPTIONS
Printer Accessories and Options
Note: To view the accessory manuals, visit the PX940 product page at
www.honeywellaidc.com
Option/Accessory
PX940A/
PX940V/
Both
Description
Wi-Fi Module Both Customer installed accessory. Use the
Wi-Fi module to communicate with the
printer wirelessly.
Parallel IEEE1284
Interface Board
Both Service technician installed accessory.
Use the parallel interface board to
make an applicator port on the back of
the printer.
Applicator Interface
Board
Both Service technician installed accessory.
Use the applicator interface board to
make an applicator port on the back of
the printer.
Industrial
Interface+UART
Both Service technician installed accessory.
Use the industrial interface+UART
board to make a UART port and GPIO
port on the back of the printer.
Verifier Calibration
Card
PX940V Use this card to calibrate the verifier.

Honeywell PX940 Specifications

General

Ethernet LAN	Yes
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Flash memory	256 MB
Internal memory	1024 MB
Page description languages	DP, DPL, XML, ZPL II, IPL
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Cables included	AC
Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI
Minimum print length	4800 mm
Maximum printing width	108 mm
Ribbon width	110 mm
Core diameter	25 mm
Ribbon length	450 m
Maximum roll diameter	80 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Display	LCD
Product color	Black
Display diagonal	3.5 \
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	506 mm
Width	261 mm
Height	398.7 mm
Weight	23000 g