Honeywell PX940 User Manual

46 PX940 User Guide
• Minimum 2D barcode size: 15 mils
Verification Length
Support maximum verification length up to 12 inches
Maximum Number of Barcodes per Label
A total of 32 barcodes can be scanned and verified per label. If the number of
barcodes on one label exceeds 32, the verifier system will show an error message.
Note: Preprinted barcodes and barcodes sent as graphic print jobs will not be verified.
Note: Only barcodes generated by printer language commands are supported for
verification.
Printing Behavior after Error Recovery
Possible printer error during printing & verification:
•Printhead lifted
•Front arm lifted
• Next label not found
• Out of media
• Out of ribbon
• Ribbon installed
Printing Behavior after Recovered from error above:
1. No void printing. User will need to manually mark/discard the labels between
the verifier module and printhead.
2. Reprint all unverified labels and verification failed labels.
The following diagrams show which labels will be reprinted in different scenarios.
Scenario 1
• All blue labels will be reprinted and verified after error recovery.
-BCFMTOPUZFUWFSJGJFEPS
WFSJGJDBUJPOJOQSPDFTT

Honeywell PX940 Specifications

General

Ethernet LAN	Yes
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Flash memory	256 MB
Internal memory	1024 MB
Page description languages	DP, DPL, XML, ZPL II, IPL
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Cables included	AC
Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI
Minimum print length	4800 mm
Maximum printing width	108 mm
Ribbon width	110 mm
Core diameter	25 mm
Ribbon length	450 m
Maximum roll diameter	80 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Display	LCD
Product color	Black
Display diagonal	3.5 \
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	506 mm
Width	261 mm
Height	398.7 mm
Weight	23000 g