Chapter 11 Camera and Multimedia 155
• Keep Backlight. Turn the backlight on or off. This overrides your phone’s
backlight settings while you are using the camera.
• Shutter Sound. Play a shutter sound when you tap the Virtual Camera
button.
• Image Properties. Adjust the Contrast, Saturation, and Sharpness before
capturing.
• Effect. Apply a special effect to your photos or videos.
• Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
• Prefix. The file name of a newly captured photo or video is set to “IMAGE” or
“VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You
can also choose the current date or
date and time as the file name prefix.
Note You cannot change the file name prefix when saving captured photos to a
storage card. Captured photos are named using the convention IMAGnnnn.jpg
(where ‘nnnn’ is the counter), and are saved to the \DCIM\100MEDIA folder on
the storage card.
• Counter. Reset the file numbering back to 1.
• Flicker Adjustment. When taking indoor shots under fluorescent lighting,
keep this setting on Auto or change it to the proper frequency (50Hz or 60Hz)
of the power in your country to reduce flicker.
• Grid (Photo mode). Show a grid on the screen so you can easily frame and
centre your subjects.
• Record with Audio (Video and MMS Video modes). Select On to record
videos with audio, or Off to record videos without audio.
• Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
• Template (Picture Theme mode). Select a template.
To Next Page
Loading...
Need help?
General
