Chapter 13 Managing Your Phone 187
To re-calibrate the touch screen
The phone’s touch screen is calibrated before shipment. Re-calibrate the touch
screen if it does not accurately respond to screen taps.
1. While the phone is on, press and hold the VOLUME UP and VOLUME DOWN
buttons, and then tap the screen to open the align screen.
2. Follow the on-screen instructions to complete the calibration.
Device name
The device name is used to identify your phone when synchronising with a
computer, connecting to a network, or restoring information from a backup.
Note If you sync multiple phones with the same computer, each phone must have a unique
name.
To change the device name
1. Tap Start > Settings > System > About.
2. Tap the
Device ID tab.
3. Enter the device name.
Notes • The device name must begin with a letter, consist of letters from A to Z, numbers from
0 to 9, and cannot contain spaces. Use the underscore character to separate words.
• If you enroll your phone to your company’s domain, the device name will be
changed to be the same as the one used to enroll your phone.
To Next Page
Loading...
Need help?
General
