● Use a USB storage device, DVD-ROM drive, or oppy disk drive (FDD) to
transmit data or install an OS.
Prerequisites
Conditions
● Conrm the server installation position in the rack.
● Obtain the USB device to be connected and place it near the server.
Data
Check that data has been copied to the USB storage device to be connected.
Tools
Electrostatic discharge (ESD) wrist strap
Hardware
The USB storage device to be connected operates properly.
Procedure
Step 1 Connect the USB device to the USB port on the RH8100 V3. See Figure 3-13.
Figure 3-13 Connecting to a USB device
----End
RH8100 V3 Server
User Guide 3 Installing the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 96
To Next Page
Loading...
Need help?
General