8 ETP4890 Monitoring Solution
About This Chapter
The ETP4890 monitoring solution is implemented by the SMU01B monitoring module in the
ETP4890 power system. In this solution, the SMU01B monitoring module reports the monitored
parameters reported by the sensor transfer box to the control system.
8.1 ETP4890 Power System
An AC-powered cabinet uses the ETP4890 power system to convert the AC input to the DC
power for power distribution. The small and modular ETP4890 power system supports easy
installation and maintenance, effective LCD and web interface management, and high security
specifications design. The power system supports a maximum of 90 A output current.
8.2 MUE02A Sensor Transfer Box
The sensor transfer box provides various sensor ports to connect the external sensors to
monitoring module, collecting signals from the sensors and forwarding the signals to the
monitoring module.
8.3 Checking Environment Monitoring Cables
The SMU01B monitoring module monitors the environment parameters collected by the sensors
in real time, and reports the alarm information to the control system. Therefore, make sure that
the connections from the sensors to the ports of the sensor transfer box, from the sensor transfer
box to the SMU01B, and from the SMU01B to the control system are correct.
8.4 Configuring the Environment Monitoring Parameters of the ETP4890
This topic describes how to configure the environment monitoring parameters of the ETP4890
through the CLI.
UA5000 Universal Access Unit
Environment Monitoring 8 ETP4890 Monitoring Solution
Issue 01 (2012-08-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
To Next Page
Loading...
Need help?
General
