Overview
227
Ignore Dots
(From page 187.)
• Disable. The VGL expects position values to be specified in tenth inches
and dot rows.
• Enable. Causes the VGL to expect position values to be specified in only
1/10ths of an inch. If the dot position is also given, it is treated as text.
The factory default is Disable.
Ignore ^Lxx Cmd.
(From page 188.)
• Disable. The factory default.
• Enable. The Form Length commands ^Lxx and ^Hxx will be ignored, and
the form length will be determined by the “Form Length” menu in the
LP+ menu.
The factory default is Disable.
Ignore Mode
(From page 185.) This parameter instructs the IGP to ignore the character
selected under the Select Character menu.
• Disable. The IGP does not ignore any characters.
• Enable. The IGP ignores the character specified in the Select Character
menu.
The factory default is Disable.
Ignore Spaces
(From page 188.)
• Disable. Trailing spaces are not deleted from alphanumeric elements in a
graphics pass.
• Enable. Trailing spaces are deleted from alphanumeric elements in a
graphics pass.
The factory default is Disable.
Ignore Text
(From page 185.)
• Disable. When disabled, text in normal mode will be printed. Attributes to
be printed depend on the PGL Normal menu setting.
• Enable. When enabled, any line of text (non-PGL commands) in normal
mode will be ignored.
The factory default is Disable.
Emulation Submenus
To Next Page
Loading...
Need help?
General
