ETHERNET PARAMS Submenus
271
Job Control
• Standard (the default). The Ethernet waits for the entire job to be
received
before it indicates the job is done.
• Enhanced. The Ethernet waits for the entire job to be
printed
before it
indicates the job is done.
• Off. There is no synchronization between the Ethernet and the printer.
NOTE: For detailed information about using the Ethernet, refer to the
Ethernet Interface Card User’s Manual
.
Offline Processing
• Disable (the default). When set to disable, the printer does not process
parallel/network data while offline.
• Enable. When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.
ETHERNET PARAMS Submenus
To Next Page
Loading...
Need help?
General
