IBM InfoPrint 6700 Series User Manual

284
Chapter 3 KERBEROS PARAMS
KERBEROS PARAMS Submenus
Kerberos Enable
• Disable (the default). Disables Kerberos authentication in the wireless
network interface.
• Enable. Enables Kerberos authentication in the wireless network
interface.
Kerb. Pwd(01–15)
First 15 characters of the Kerberos password (maximum number of
characters is 40).
Kerb. Pwd(16–30)
Characters 31 to 40 of the Kerberos password (maximum number of
characters is 40).
Kerb. Pwd(31–40)
Characters 31 to 40 of the Kerberos password (maximum number of
characters is 40).
Reset Kerb. Pwd
Resets Kerberos password to an empty string.
KDC Port Number
KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used
for Kerberos Communication.
The range is 0-65535, and the factory default is 88.
Clock Skew Units
The options are Seconds and Minutes, and the factory default is Seconds.
Clock Skew (SEC)
Sets the maximum allowable amount of time in seconds (SEC) or minutes
(MIN), as specified by the Clock Skew Units, that Kerberos authentication will
tolerate before assuming that a Kerberos message is invalid.
• Seconds: The range is 60-900, and the default is 300.
• Minutes: The range is 1-15, and the default is 5.
NOTE: Whatever submenu is selected in Clock Skew Units will display on the
Clock Skew (SEC) menu. For example, if you select Minutes, the
Clock Skew (SEC) menu name will change to Clock Skew (MIN).

IBM InfoPrint 6700 Series Specifications

General

Brand	IBM
Model	InfoPrint 6700 Series
Category	Printer
Language	English