Symptom Action
The system stopped and a POST indicator is
displayed on the system console and an
eight-digit error code is not displayed.
If the POST indicator represents:
1. Memory, go to “MAP 1540: Minimum
Configuration” on page 117.
2. Keyboard
a. Replace the keyboard cable.
b. Replace the keyboard.
c. Replace the service processor card.
d. Go to “MAP 1540: Minimum
Configuration” on page 117
3. Network, go to “MAP 1540: Minimum
Configuration” on page 117.
4. SCSI, go to “MAP 1540: Minimum
Configuration” on page 117.
5. Speaker
a. Replace the speaker.
b. Replace the service processor card.
c. Go to “MAP 1540: Minimum
Configuration” on page 117
The System Management Services menu is
displayed
Go to “Step 1020-4” on page 87.
All other symptoms. If you were directed here from the Entry MAP,
go to “MAP 1540: Minimum Configuration” on
page 117. Otherwise, find the symptom in the
“Entry MAP” on page 79.
Step 1020-2
There is a problem with the keyboard.
Find the type of keyboard you are using in the following table; then follow the
instructions given in the Action column.
Keyboard Type Action
Type 101 keyboard (U.S.). Identify by the size
of the Enter key. The Enter key is in only one
horizontal row of keys.
Record error code M0KBD001; then go to “Step
1020-3” on page 87.
Type 102 keyboard (W.T.). Identify by the size
of the Enter key. The Enter key extends into
two horizontal rows.
Record error code M0KBD002; then go to “Step
1020-3” on page 87.
Type 106 keyboard. (Identify by the Japanese
characters.)
Record error code M0KBD003; then go to “Step
1020-3” on page 87.
ASCII terminal keyboard Go to the documentation for this type of ASCII
terminal and continue problem determination.
86 Service Guide
To Next Page
Loading...
Need help?
General