Function 62 - Display Service Processor Control Storage
This displays the service processor control storage area data defined by addresses set
by functions 59 thru 60.
Function 63 - System Status SRC Trace
The system status SRC trace is a copy of the last 25 status SRCs (usually associated
with the IPL sequence or the power-off sequence).
Enter a subfunction between hexadecimal 00 and 18 to look at the status SRCs in
sequential order. The most recent SRC (the last status SRC) is viewed at subfunction
hexadecimal 18.
Function 64 - Diagnostic Status SRC Trace
The diagnostic status SRC trace is a copy of the last 25 status SRCs (usually
associated with the service processor function of problem determination and main
storage dump).
Enter a subfunction between hexadecimal 00 and 18 to look at the status SRCs in
sequence. The most recent SRC (the last status SRC) is seen at subfunction
hexadecimal 18, and the extended SRC words for this SRC are seen at subfunction 19
through 20.
Appendix C. Operator Panel Function Codes 607
To Next Page
Loading...
Need help?
General