Step 1020-3
Take the following actions:
1. Find the eight-digit error code in “Chapter 5. Error Code to FRU Index” on page 157.
Note: If the eight-digit error code is not listed in “Chapter 5. Error Code to FRU
Index” on page 157, look for it in the following:
v Any supplemental service manuals for attached devices
v The diagnostic problem report screen for additional information
v The Service Hints service aid
v The CEREADME file (by using the Service Hints service aid).
Note: Information about service aids can be found in Diagnostic
Information for Multiple Bus Systems.
2. Perform the action listed.
Step 1020-4
1. Turn off, then turn on the system unit.
2. When the Keyboard indicator (the word Keyboard) is displayed, press the 1 key on
the system console.
3. When the System Management Services menus appear, check the error log for any
errors.
a. Choose Error Log.
b. If an error is logged, check the time stamp.
c. If the error was logged during the current boot attempt, record it.
d. Look up the error in the “Chapter 5. Error Code to FRU Index” on page 157 and
do the listed action.
e. If no recent error is logged in the error log, go to “MAP 1540: Minimum
Configuration” on page 117.
Chapter 3. Maintenance Analysis Procedures 87
To Next Page
Loading...
Need help?
General