IBM S85 pSeries 680 User Manual

(1xxx) System Power Control Network (SPCN) Reference Codes
The system power control network (SPCN) detected a failure.
1. Look at the four rightmost characters of the SRC (data display for function 11-3).
These four characters are the unit reference code.
2. Find the unit reference code in the following table.
Reference
Code
Description/Action
(Perform all actions before exchanging Failing
Items)
Failing Item
00A0 SPCN BATs in process.
No action required. This reference code is logged
for information only. If this reference code is
present for more than 1 minute, go to “MAP 1540:
Minimum Configuration” on page 117.
00A1 Regulator 1 has been turned off by system.
No action required. This reference code is logged
for information only.
00A2 Regulator 2 has been turned off by system.
No action required. This reference code is logged
for information only.
00A3 Regulator 3 has been turned off by system.
No action required. This reference code is logged
for information only.
00A4 Regulator 4 has been turned off by system.
No action required. This reference code is logged
for information only.
00A5 Regulator 5 has been turned off by system.
No action required. This reference code is logged
for information only.
00A6 Regulator 6 has been turned off by system.
No action required. This reference code is logged
for information only.
00AA Download in process.
No action required. This reference code is logged
for information only.
1xxx
Chapter 5. Error Code to FRU Index 189

IBM S85 pSeries 680 Specifications

General

Brand	IBM
Model	S85 pSeries 680
Category	Server
Language	English