IBM S85 pSeries 680 User Manual

Function 01 - Display Selected IPL Type, Mode and Speed
This function allows you to display the IPL type and IPL speed. Pressing the Enter
button in Function 01 toggles between:
v Display IPL type (A or B)
v Display IPL speed (F, S, or V=ForV=S)
Table 12. Function 01
Function/Data Description
01______ Usethescrolluporscrolldown buttons and scroll to Function 01.
01 _ _ _ A _ _ Press Enter to enter Function 01 Selected IPL Type display. Valid types,
which appear in the sixth character position of the Function/Data
display are A or B. See Table 10 on page 598 for descriptions of IPL
types.
01__V=F_ UseEnteragain to toggle to Selected IPL Speed display. Valid speed
displays are F, S, V=F or V=S.
v F: Fast override selected.
v S: Slow override selected.
v V = (F or S): Use system selected speed.
01 _ _ _ A _ _ Use Enter to toggle to Selected IPL Type display.
Function 02 - Select IPL Type, Mode and Speed
This function allows you to select the IPL type and IPL speed. System power must be
off to change IPL speed.
1. Pressing Enter once puts you into the change IPL type (A or B) operation.
Attention: IPL types C and D are not supported and may cause data loss if used.
2. Pressing the Enter button twice puts you into the operation for overriding the system
IPL speed (F, S, V) for the next IPL. Subsequent IPLs are performed at the system
selected speed.
For example, if you want to select IPL Type, select Function 02. Press Enter once, and
then use the scroll up or scroll down button to select an IPL type. Pressing Enter again
saves that value and exits the Select IPL Type display.
If you want to change the IPL speed, you must have system power off. Select Function
02, press Enter twice, use the scroll up or scroll down button to select F, S, or V and
then press Enter to activate the override (F or S) or cancel it (V) and exit the Select IPL
Speed display. See Table 11 on page 598 for recommended speed settings.
Table 13. Function 02 Select IPL Type
Function/Data Description
02______ Usethescrolluporscrolldown button and scroll to Function 02.
02 _ _ _ A _ _ Press Enter once to enter Function 02. Select IPL Type display. Use the
scroll up or scroll down buttons to scroll through the IPL types A and B.
See Table 10 on page 598 for descriptions of IPL types. Pressing Enter
saves the selected IPL type and exits Function 02.
Appendix C. Operator Panel Function Codes
599

IBM S85 pSeries 680 Specifications

General

Brand	IBM
Model	S85 pSeries 680
Category	Server
Language	English