gathers logs and sends them to the TSSC as part of a call home packet sent to
RETAIN
®
. In cases where external connection for the TSSC is not allowed, the
TSSC is the repository of the logs and is still a requirement. FC 2732 is the TSSC
feature code. FC 2714 and FC 2715 provide connectivity to an existing TSSC.
Note: If the customer has an existing TSSC, it can be used with the appliance only
if the TSSC meets the compatibility requirements discussed in the IBM System
Storage TS7650 ProtecTIER Deduplication Appliance and TS7650G Deduplication
Gateway Introduction and Planning Guide, IBM form number GA32-0918. In addition,
if the TS7650 Appliance is shipped without a TSSC, the customer needs to provide
a USB keyboard and graphics-capable monitor for use during server configuration.
Important: If you have an existing TSSC, the TSSC microcode must be at version
5.11.5 or later before upgrading ProtecTIER.
20 IBM System Storage TS7650 ProtecTIER Deduplication Appliance: Installation Roadmap Guide
|
To Next Page
Loading...
Need help?
General