112
14
OTHER FUNCTIONS
New2001
14
■ CPU reset
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
IMPORTANT!:
Resetting the transceiver CLEARS all memory information
and initializes all values in the transceiver.
DD
Resetting from the application
qSelect “Transceiver Initialization(N)” in the File menu; or
while pressing and holding [Ctrl], press [N] key on the PC
keyboard.
• Aconfirmation dialog appears.
wClick [OK] to reset the CPU.
DD
Resetting from the RC-24
➥ While pushing and holding [V/M] and [CALL], turn power
ON.
•“Memory Clear Wait...” displayed then shows the initial
condition.
Wait...
Memory
Clear
[V/M]
[CALL]
[PWR]
ID-1_ENG_2.qxd 04.9.22 9:30 Page 112 (1,1)
To Next Page
Loading...
Need help?
General
